Airswift is currently looking for a Wellhead/XT & IWOCS Lead Engineering to work with an Operator based in Paris.
- Starting date: ASAP
- Duration : 12 months (FEED Phase)
- Renewable: Yes
- Location: Paris Area, France
- Status: Residential
Mission/Service dimension:
PREOWEI will be developed as a subsea Tie-back to the EGINA FPSO. The service holder shall provide specialist technical support and engineering lead to the Wellhead/XT & IWOCS Engineers to ensure compliance of package designs, test regimes and documentation within contract basis of design during FEED and subsequent EPCI phases of the project
ACTIVITIES
The activities of the service holder, but not limited to:
• Provide technical support the SPS/Drilling interface engineering scope of work ensuring that designs are in alignment with rig specific requirements
• Technical lead for all documents relating to wellheads, XT & IWOCS consolidating all comments from other reviewers within project time periods
• Manage (initiate, coordinate and resolve) in cooperation with SURF interface lead; all interfaces arising from the design of the wellheads, Xmas Trees, Tubing hangers and IWOCS (mechanical, electrical, control and monitoring interfaces)
• Report engineering and/or fabrication progress formally through weekly and monthly reports to the SPS Engineering Manager, highlighting critical problems and identifying potential schedule and cost impacts. Jointly agree recovery measures and ensure technical implementation by the contractor
• Maintain tracking logs for engineering actions generated during regular technical clarification meetings related to wellhead/XT and IWOCS Systems and ensuring that open actions are closed in a timely manner • Technical review of the gap analysis and support towards disposition for resolution/ closure of any deviations or derogations towards COMPANYS referential from Alliances during the FEED and EPCI stages of the project
• Liaise with other disciplines and packages to ensure cross package conformity of designs
• Delegate package work scope to the wellhead/XT & IWOCS/SPS-Drilling interface Engineers as required • Mentor wellhead/XT & IWOCS/SPS-Drilling interface Engineers by ensuring performance targets are established and monitored
• Capture & compile list of lessons learned/ feedback for the wellhead/XT/IWOCS systems on a regular basis throughout FEED and during EPCI phase of the project which could eventually lead to REX system
OTHER OBSERVATION:
• Primary focus is to be the technical focal point for all Wellhead/XT/IWOCS engineering design ensuring full compliance with basis of design and contract requirements/specifications.
• Timely execution of the FEED within 6 months is key which will involve rigorous evaluation of all alliances leading up the technical award of contract to the execution phase when the appropriate alliance is selected
• Technical disposition with close liaison with HQ on all deviations/derogations from COMPANYS General Specifications/Referential related to design of wellhead/XT/IWOCS Systems • Will report to the SPS Engineering Manage
QUALIFICATION:
Qualification: Graduate in Engineering (Masters level), in Petroleum Industry.
Depending on experience, candidates with BSc may be also given consideration.
- Languages: English (fluent verbal & written)
- Professional Experience: minimum 15 years
- Experience within projects: minimum 15 years minimum 15 Years Wellhead/XT & IWOCS, and Knowledge of Offshore Subsea Drilling Engineering
CONTEXTE AND ENVIRONMENT:
The PREOWEI Project is challenging Project technically, and with the added constraint of a short timeline for its execution. Technically challenging project with several technical novelties/innovations withins and oil & industry - long tie-back distance (~30km), Production flowline heating solution (DEH) at maximum water depth with some qualification, Subsea brownfield tie-in to existing EGINA facilities (SIMOPS), Constrained flowlines/umbilical layout/routing ( Seabed disturbance, Geohazards, DEH constraints, several crossings etc.), Novel material technology-CRA cladded/lined flowline, potentially with Mechanically-Lined Pipe (MLP), Flowline S-lay in deepwater, Large scale deployment of long Thermoplastic Composite Pipe (TCP) for WI jumpers. Heavy workload with tight FEED schedule and activities leading to FID.
Airswift is currently looking for a Wellhead/XT & IWOCS Lead Engineering to work with an Operator based in Paris.
- Starting date: ASAP
- Duration : 12 months (FEED Phase)
- Renewable: Yes
- Location: Paris Area, France
- Status: Residential
Mission/Service dimension:
PREOWEI will be developed as a subsea Tie-back to the EGINA FPSO. The service holder shall provide specialist technical support and engineering lead to the Wellhead/XT & IWOCS Engineers to ensure compliance of package designs, test regimes and documentation within contract basis of design during FEED and subsequent EPCI phases of the project
ACTIVITIES
The activities of the service holder, but not limited to:
• Provide technical support the SPS/Drilling interface engineering scope of work ensuring that designs are in alignment with rig specific requirements
• Technical lead for all documents relating to wellheads, XT & IWOCS consolidating all comments from other reviewers within project time periods
• Manage (initiate, coordinate and resolve) in cooperation with SURF interface lead; all interfaces arising from the design of the wellheads, Xmas Trees, Tubing hangers and IWOCS (mechanical, electrical, control and monitoring interfaces)
• Report engineering and/or fabrication progress formally through weekly and monthly reports to the SPS Engineering Manager, highlighting critical problems and identifying potential schedule and cost impacts. Jointly agree recovery measures and ensure technical implementation by the contractor
• Maintain tracking logs for engineering actions generated during regular technical clarification meetings related to wellhead/XT and IWOCS Systems and ensuring that open actions are closed in a timely manner • Technical review of the gap analysis and support towards disposition for resolution/ closure of any deviations or derogations towards COMPANYS referential from Alliances during the FEED and EPCI stages of the project
• Liaise with other disciplines and packages to ensure cross package conformity of designs
• Delegate package work scope to the wellhead/XT & IWOCS/SPS-Drilling interface Engineers as required • Mentor wellhead/XT & IWOCS/SPS-Drilling interface Engineers by ensuring performance targets are established and monitored
• Capture & compile list of lessons learned/ feedback for the wellhead/XT/IWOCS systems on a regular basis throughout FEED and during EPCI phase of the project which could eventually lead to REX system
OTHER OBSERVATION:
• Primary focus is to be the technical focal point for all Wellhead/XT/IWOCS engineering design ensuring full compliance with basis of design and contract requirements/specifications.
• Timely execution of the FEED within 6 months is key which will involve rigorous evaluation of all alliances leading up the technical award of contract to the execution phase when the appropriate alliance is selected
• Technical disposition with close liaison with HQ on all deviations/derogations from COMPANYS General Specifications/Referential related to design of wellhead/XT/IWOCS Systems • Will report to the SPS Engineering Manage
QUALIFICATION:
Qualification: Graduate in Engineering (Masters level), in Petroleum Industry.
Depending on experience, candidates with BSc may be also given consideration.
- Languages: English (fluent verbal & written)
- Professional Experience: minimum 15 years
- Experience within projects: minimum 15 years minimum 15 Years Wellhead/XT & IWOCS, and Knowledge of Offshore Subsea Drilling Engineering
CONTEXTE AND ENVIRONMENT:
The PREOWEI Project is challenging Project technically, and with the added constraint of a short timeline for its execution. Technically challenging project with several technical novelties/innovations within and oil & industry - long tie-back distance (~30km), Production flowline heating solution (DEH) at maximum water depth with some qualification, Subsea brownfield tie-in to existing EGINA facilities (SIMOPS), Constrained flowlines/umbilical layout/routing ( Seabed disturbance, Geohazards, DEH constraints, several crossings etc.), Novel material technology-CRA cladded/lined flowline, potentially with Mechanically-Lined Pipe (MLP), Flowline S-lay in deepwater, Large scale deployment of long Thermoplastic Composite Pipe (TCP) for WI jumpers. Heavy workload with tight FEED schedule and activities leading to FID.
Don’t see a job for you? Register for our candidate portal
Sign in or register for Airswift Digital to stay updated with recommended jobs.
